Energy Solutions can help you reduce your electricity bills
Commercial Enquiry :
+919373336340 | +919822407189
sales@enertechups.com
Customer Care & Support: +919373679255 support@enertechups.com
Careers:
+919075088292
hr@enertechups.com
Energy Solutions can help you reduce your electricity bills
Commercial Enquiry :
+919373336340 | +919822407189
sales@enertechups.com
Customer Care & Support: +919373679255 support@enertechups.com
Careers:
+919075088292
hr@enertechups.com
EnerTech Solar Online UPS is a perfect choice for industries like the manufacturing industry, healthcare, automotive, pharmaceutical, renewable energy plants, etc. The UPS has a contemporary design and a 32-bit DSP-based design along with a selectable priority. The solar online UPS allows a steady flow of electricity and smooth functioning even during major power breakdowns.
They function smoothly even when exposed to a harsh environment and varying temperatures. These solar UPS are designed especially to handle critical loads and save your battery life. It automatically connects when the power is cut off and at the same time also improves energy efficiency.
The solar UPS is fully integrated and provides an end-to-end power supply for industries and other areas where there is a high demand for electricity. The pure sine wave output with low THD of the inverter ensures efficiency. The MPPT based Solar UPS allows high performance even when monitored remotely using MODBUS, Ethernet, and RS232. The Solar online UPS by EnerTech can function even in different environmental conditions, like an altitude of 1000 meters above sea level and in places where the temperature is as low as 10° celsius to as high as 55° celsius, because of the inbuilt isolation transformer.
The battery is designed in such a way that it allows sufficient backup during the night. There are three modes available- VFD mode, Grid Export Mode, and AC mode and the GRID export mode has the option to enable or disable. The solar online UPS has an output voltage of 415V AC +-10% in grid export mode, 0- 415V AC +-2% in VFD, and 415V in AC mode. The output frequency varies in VFD but in the AC mood and grid export the frequency is approximately 50hZ.
The EnerTech UPS is an IGBT-based Solar Online UPS and parallel configuration. The solar UPS has a selectable priority of SBG/SGB. You can easily adjust the settings using the front LCD like grid voltage, current, frequency, PV voltage, battery status, etc. When there is excess solar energy then the inverter works on solar power and the rest of the solar energy is used to charge the batteries. When there is an unavailability of solar energy, the entire load works on the grid via a grid charger. During the absence of grid supply, UPS shifts its load to use the buffer battery backup. Solar UPS has a pre-alarm set up for low battery and overload. The batteries have a discharge level of 75% and 25% as a buffer.
The Solar Online UPS (3Ph-1Ph) by EnerTech is approved by MNRE and is indigenous. We are one of the top UPS suppliers in India. These solar UPS are one of the few UPS, which are approved to work even in extreme climate conditions and are environmentally friendly as they produce less sound and have been accredited by IEC- 60068 for environmental tests and IEC- 61683 for efficiency. We have service offices in various cities including Hyderabad, Chennai, Coimbatore, Bangalore, Mumbai, Bhopal, Ahmedabad, and other metro cities. Our UPS are exported to African and Asian countries. We provide user-friendly and reliable power solutions with customizable options. It is one of the most preferred solar online UPS.
EnerTech Solar online UPS is a type of uninterruptible power supply (UPS) that is designed to work with solar panels. It combines the functionality of a UPS with a solar charge controller, inverter, and battery bank.
Here are some reasons why you might need a solar online UPS:
Overall, solar online UPS is an excellent solution for those looking for a reliable, eco-friendly, and cost-effective backup power source.
| Grid Charger | |
|---|---|
|
Grid Frequency Sync Range |
50Hz ± 6% |
|
Charger Peak Efficiency |
Higher than 90% |
|
Max Grid Import Power Capacity |
Double of Inverter capacity dependent on battery charging current |
|
Max Batt Amp (Charging) |
5A to 200A selectable |
|
Self Consumption |
Lower than 4% |
|
Recommended DG/GRID Capacity |
Double of Inverter Capacity |
| Solar Charge Controller | |
|---|---|
|
Charge Controller Type |
MPPT |
|
Charger Topology |
BUCK |
|
No of MPPT Channels |
1 |
|
Max Battery Amps during PV charging |
Full Capacity in Boost Mode / Current Control in Float Mode as per Battery AH |
|
Battery Type Supported |
LMLA, VRLA, SMF, Ni-Cd: Charging Profile can be configured as per the battery requirement |
|
Peak Charging Efficiency |
Higher than 94% Upto 98% |
| Configuration | |
|---|---|
|
Battery Buffer Setting |
Selectable from 25%,50%,75% |
|
MPPT Modes |
2 |
| Input-Solar | |
|---|---|
|
VOC Range |
0 – 900VDC |
| OUTPUT – VFD | |
|---|---|
|
Output Voltage |
0- 415V AC ± 2 %, 3P, 3W |
|
Output Frequency |
Variable |
|
Duty |
Continuous |
| Input-Grid | |
|---|---|
|
Input Voltage Range |
415V AC ± 10% , 3Ph, 3W |
|
Nominal Frequency |
50 Hz (± 6%) |
|
Output Group |
1. Voltage, 2. Frequency |
|
Output Group |
1. Solar Voltage , 2. Solar Current, 3. Power( KW), 4. Solar Energy (KWh) |
|
Battery Group |
1. Voltage, 2.Current 3. SOC |
|
Alarm Group |
Alarms Are Available For Fault Condition |
|
Communication |
Rs 485 |
|
LCD With Backlight & Tactile Key Pad Interface |
Yes |
|
Protocol |
Modbus RTU |
|
Testing Standard |
IEC -61683:1999, IEC- 60068-2-1, IEC-60068-2-2, IEC-60068-2-14, IEC-60068-2-30- As Per MNRE Requirement |
|
Auto Bypass feature |
Available |
|
Grid Export Mode |
Available, Enable/Disable Options available |
|
Safety Factor |
1 For Electronic Devices, 1 For Electrical |
| Indication | |
|---|---|
|
LCD Display Parameters |
INPUT GRP | Voltage | Current | Frequency |
| Configuration | |
|---|---|
|
Battery Buffer Setting |
Selectable from 25%,50%,75% |
|
MPPT Modes |
2 |
| Input-Grid | |
|---|---|
|
Input Voltage Range |
415V AC ± 10% , 3Ph, 3W |
|
Nominal Frequency |
50 Hz (± 6%) |
| Inverter | |
|---|---|
|
Output Frequency |
50Hz ± 0.5% |
|
Voltage Regulation(Stand Alone) |
±2% |
|
Frequency Regulation(Stand Alone) |
±0.5Hz |
|
THD |
THD less than 4% |
|
OUTPUT Waveform |
Pure Sine Wave |
|
Galvanic Isolation |
Inbuilt Isolation Transformer at Inverter Output |
|
Output Power Factor |
0.8lagging |
|
Peak Efficiency (Full Load) |
Higher than 75% |
|
Overload capacity |
125% FOR 60 SEC, 150% FOR 5 SEC / Can be customized |
|
DG Compatibility |
Available |
|
Auto Bypass feature |
Available |
|
Grid Export Mode |
Available, Enable/Disable Options available |
|
Anti Islanding Function |
Available, In Compliance with IEC 62116 |
|
Compatible IEC standards |
IEC -61683:1999- As per MNRE Requirement |
| Indication | |
|---|---|
|
LCD Display Parameters |
INPUT GRP | Voltage | Current | Frequency |
| OUTPUT – AC MODE | |
|---|---|
|
Output Voltage |
415V AC, 3P, 3W |
|
Output Frequency |
50hZ |
|
Duty |
Continuous |
| OUTPUT – GRID EXPORT | |
|---|---|
|
Output Voltage |
415V AC +-10%, 3P, 3W |
|
Output Frequency |
47-53 |
|
Anti Islanding Function |
Available |
|
Duty |
Continuous |
| CONFIGURATION | |
|---|---|
|
Modes Available |
VFD Mode, AC MODE, GRID EXPORT |
|
GRID Export Mode |
Enable / Disable Option Available |
| ENVIRONMENTAL | |
|---|---|
|
Acoustic Noise Level from 1 m |
≤ 65 dB |
|
Operating Temperature |
0 to 40 Deg C |
|
Storage Temperature |
-10 Deg C to 60 Deg C |
|
Relative Humidity |
Up to 95 % (Non-Condensing) |
|
Altitude |
< 1000 meter above sea level |
| PHYSICAL | |
|---|---|
|
Enclosure Protection Grade |
IP 20 |
|
Enclosure Thickness |
Frame 2.0mm & all covers 1.6mm |
|
Cooling |
Forced Air |
|
Colour |
RAL 7032 / RAL 7016 |
|
Cable Entry |
Bottom |
| CONNECTIVITY | |
|---|---|
|
Communication (all optional) |
RS 232 or Rs485, Modbus or GSM Connectivity or Wif |
|
Monitoring (all optional) |
ENERLOG (Remote Monitoring Solution) |
Copyright 2026 Enertech. All rights reserved by Enertech.
